Dimming 2-channel actuator DA2-22M

Print page

• DA2-22M contains 2 inputs 230V AC and 2 semi-conductive controlled output 230 V AC.
• Maximal possible load is 500 VA for each channel.
• Switching or dimming of the output (output active) is indicated by permanent light of adequate LED diode for each channel  located on front panel.
• Buttons on front panel can be controlled manually to switch on/off an adequate output
• It is necessary to protect potential L on device terminal by a protection element which is adequate to load connected to the device.
• Series fuse must be dimensioned according to connected load.
• DA2-22M in  3-MODULE housing is designated for mounting into a switchboard, onto a Din rail EN60715.
• Unit supports auto detection of load type.

Download:

		Datasheet DA2-22M [195 kB]
		Instruction manual [488 kB]