Heating controller HC2-01B

Print page

• HC2-01B/AC is designated for switching thermo-valves 0/1 in voltage range 24-230V AC. 
  
• 
  Switched current of the controlled device (thermo-valve) cannot exceed 0,15A/230V AC and 0,5A/24V DC. 
  
• 
  The device is not designated for switching of higher currents. 
  
• 
  HC2-01B/DC is designated for with supply voltage 24V DC or with control by signal 0(1)-10V. 
  
• 
  It is possible to use a voltage output +24V to supply the thermo-valve (it is necessary to remember that it means a current loading for the bus). 
  
• 
  Thermo-valve controller HC2-01B/DC generates analogue voltage output 0(1)-10V. 
  
• 
  This unit contains 1 independent output (channel), which can be regulated in range 0-10V or 1-10V depending on the type and output of controller device. 
  
• 
  Range of output voltage can be selected in program IDM. 
  
• 
  It is used fro regulation and control of other devices, which can be controlled by this signal (thermo valve, servo drives, elements of measuring and regulation and others). 
  
• 
  Units HC2-01B are equipped by an input for temperature measuring by sensors TC, TZ. 
  
• 
  HC2-01B in MINI housing is designated for mounting into a wiring box.